top of page

Making a Guitar Sound Like a Horn/String Section

Nov 1
3 min read

Exploring slide guitar, fuzz, and volume swells in an ongoing music production.

I'm currently working on a jazz ballad production, and today I experimented with using electric slide guitar to create something closer to a small horn or string section.

Rather than adding a conventional guitar part, I wanted to explore how two independent melodic lines could support the arrangement with smooth sustain, subtle movement, and expressive dynamics.

The idea was simple: make the guitar function more like another instrument, without losing the expressive character of a real performance.

The Musical Approach

A horn or string section doesn't necessarily need to play complicated phrases to create a strong musical effect. Sometimes, a sustained note, a gentle swell, or a small counter-melody can change the atmosphere of an entire arrangement.

For this recording, I created two separate single-note slide guitar lines, each with its own melodic movement.

Instead of playing chords or typical guitar licks, I approached the parts as if I were arranging for two melodic instruments.

Slide guitar felt like an interesting choice because of its continuous pitch movement, natural vibrato, and ability to sustain notes expressively.

The volume pedal was particularly important. By controlling the attack and gradually bringing notes into the arrangement, I could soften the guitar's natural articulation and create a more horn- or string-like character.

Building the Sound

I used a Fender Stratocaster, a modified Electro-Harmonix Big Muff, and an Ernie Ball volume pedal.

The basic signal chain was:

Fender Stratocaster → Modified Big Muff → Volume Pedal → Passive DI → MOTU M2 → Logic Pro

The Big Muff provided the sustain needed to hold long melodic notes. My modified pedal has a Creamy Gain / Flat Mids modification, and I kept the sustain relatively low while adjusting the output level.

I also experimented with the Sag control on my Voodoo Lab Pedal Power 2 Plus, introducing a slight voltage drop to influence the response of the fuzz.

The volume pedal was placed directly after the Big Muff. This allowed me to shape the volume envelope of an already sustained signal, rather than changing how hard the guitar was driving the fuzz.

That distinction was important for creating smoother swells.

Technical Notes

For anyone interested in the recording setup, here are the settings I used:

Equipment

Fender Stratocaster

Voodoo Lab Pedal Power 2 Plus

Modified EHX Big Muff

Ernie Ball VP Jr

Passive DI

MOTU M2

In Logic Pro, I bypassed the amp simulation's preamp stage and used the cabinet simulation.

I then applied some basic corrective EQ and ambient reverb to help position the sound within the arrangement.

Recording Two Independent Lines

I recorded two passes for each slide guitar part, making four passes in total.

Rather than concentrating only on individual notes, I paid particular attention to intonation, vibrato, and the timing of the volume swells.

After recording, I comped the performances and consolidated them into two separate audio stems.

Keeping the lines independent will give me more flexibility when adjusting their balance and placement in the final mix.

Listen to the Experiment

This short excerpt includes the slide guitar layers alongside other instruments from the production, with the lead vocal omitted.

It's still a work in progress. The final EQ, dynamics, stereo placement, and overall balance will be revisited once the remaining production tracks are complete.

Yew Got Sound | Recording, Music Production & Creative Sound Exploration

bottom of page